Image

Mount antenna

Mounts

MT 1

MT 1s

The MT 1 mount is good for the Models 100, 200, 300 and 400 antenna. It's made of 304 stainless-steel therefore it is deterioration resistant and incredibly powerful. It comes down currently assembled aided by the coax stud. Even the supplied U bolts and peanuts tend to be stainless-steel. This bracket will bracket around a 1" business standard pipe.

The MT1s mount is good for the Model 40A-HP and 75A antennas. It's manufactured from 304 metal therefore it is corrosion resistant and incredibly strong. It comes currently put together using coax stud. Perhaps the furnished U bolts and peanuts tend to be metal. This bracket will bracket as much as a 1" business standard pipeline.

$119.00

$114.00

LTMT 1

MT 2

The LTMT 1 mount is made for the small Tarheel antenna. It really is made of 304 metal therefore it is deterioration resistant and incredibly strong. It comes down currently assembled because of the coax stud. Even the supplied U bolts and nuts are metal. This bracket will bracket as much as a 1" industry standard pipe.

The MT 2 mount is created as a help for the MT 1 mount. This mount can be all 304 stainless, included with the mount is stainless installing bolts, washers and nuts. This mount comes with extra holes punched on it so that it are mounted to just about anything.

$89.00

$99.00

MT 3

MT 4

The MT 3 mount is created as a support when it comes to MT 1 mount, it really is made for the 2" x 2" receiver. This mount can be 304 stainless. The mount comes with an installed anti-rattle system.

The MT 4 mount is created as a support for the MT 1 mount, it really is made for the 1-1/4" x 1-1/4" receiver. This mount can also be 304 stainless-steel. The mount comes with an installed anti-rattle system.

9.00

MT 3 FB

MT 4 FB

The MT 3 FB mount is created as a support the MT 1 mount, it is made for the 2" x 2" receiver. This mount is made to fold back once again to allow you to open the doorways in your SUV or allow tailgate upon your pickup. This mount can be 304 stainless. The mount includes an installed anti-rattle kit.

The MT 4 FB mount is created as an assistance the MT 1 mount, it really is made for the 1 1/4" x 1 1/4" receiver. This mount is made to fold back once again to enable you to open up the doorways on your SUV or allow the tailgate down on your pickup. This mount can be 304 stainless steel. The mount comes with an installed anti-rattle system.

$169.00

$164.00

MT 3 OS

MT 3 OFB

The MT 3 OS mount is made as an assistance for MT 1 mount, it's designed for the 2" x 2" receiver. This mount can also be offset to enable you to get an unobstructed view of the custom license dish. Additionally, on split door SUVs it allows you to open up the proper home. This mount is also 304 metal. The mount comes with an installed anti-rattle system.

The MT 3 OFB mount is manufactured as a help when it comes to MT 1 mount, it is created for the 2" x 2" receiver. This mount was created to fold back once again to allow you to open the doors in your SUV or let the tailgate upon your pickup; additionally it is offset to allow you to get an unobstructed view of this custom permit dish. Also, on split home SUVs it enables you to start just the right door without folding right back. This mount is also 304 stainless-steel. The mount includes an installed anti-rattle system.

9.00

$199.00

MT 5

MT 5S

The MT 5 handbook raise & lay mount is made as an assistance the MT 1 mount, it really is designed to be used inside sleep of a truck or anytime you like to make use of your antenna in a fashion that would require you to put the antenna down. This mount is also 304 metal.

The MT 5S handbook raise & set mount is made as a help for the MT-1S mount, it really is built to be used in bed of a vehicle or anywhere that you choose to use your antenna in a fashion that would require that you put the antenna down. That is a taller type of the MT 5S, made to put the antenna within the wheel well. This mount is also 304 metal.

$159.00

$154.00

MT 6

The MT 6 handbook lift & put mount is created as a support when it comes to MT 1 mount, it is designed to be utilized within the bed of a truck or any where you like to use your antenna in a fashion that would need you to set the antenna down. This really is a taller type of the MT 5, built to put the antenna across wheel really. This mount can be 304 stainless-steel.

$179.00

MT 7

MT 7P

The MT 7 Corner Mount built to be utilized on pick-up bed railway. For usage using the Little Tarheel-HP, Little Tarheel II, Model 40A-HP, or Model 75A antennas. This mount can also be 304 stainless steel.

The MT 7P Corner article Mount made to be utilized from the pick-up bed train. For use utilizing the Little Tarheel-HP, Little Tarheel II, Model 40A-HP, or Model 75A antennas. This mount is also 304 stainless.

The MT-7 FBD Fold straight back Corner article Mount built to be used regarding the motorist's side of the pick-up bed rail. For use aided by the Little Tarheel-HP, minimal Tarheel II, Model 40A-HP, or Model 75A antennas. This mount can also be 304 stainless.

The MT-7 FBP Fold Back Corner Post Mount built to be utilized regarding Passenger region of the pick-up bed railway. To be used utilizing the minimal Tarheel-HP, Little Tarheel II, Model 40A-HP, or Model 75A antennas. This mount can be 304 stainless.

MT 10S

MT 10L

The MT 10S Foldover Side Rail Mount when it comes to Model 75 with all the brief post is manufactured as a support the Small MT 1 mount, it's made to be properly used from the bedrail of a vehicle in a manner that would allow you to set the antenna down. This mount normally 304 stainless.

The MT 10L Foldover Side Rail Mount the Model 100/300 using the long post is manufactured as an assistance for the MT 1 mount, it's made to be applied in the bedrail of a truck in a fashion that will allow that set the antenna down. This mount can be 304 stainless-steel.

$139.00

MT 11S

MT 11L

The MT 11S Foldover Flat Plate Mount for the Model 75 because of the short post is made as an assistance when it comes to Small MT 1 mount, it's built to be used in the bedrail of a truck in a fashion that would allow one to put the antenna down. This mount can also be 304 stainless.

The MT 11L Foldover Flat Plate Mount for the Model 100/300 utilizing the long post is manufactured as a help the MT 1 mount, it is designed to be used regarding bedrail of a truck in a manner that will allow that put the antenna down. This mount normally 304 metal.

MT 12

The MT 12 is a 2" Receiver Hitch Mount with a 3' expansion to come out from the region of the car. The MT 1 antenna bracket suits on pipe for simple installation. This mount normally 304 stainless.

Source: www.tarheelantennas.com
RESOURCES
RELATED VIDEO
35" K40 Magnet Mount CB Antenna
35" K40 Magnet Mount CB Antenna
Hamstick Portable Antenna Mount/Mast-Part 2
Hamstick Portable Antenna Mount/Mast-Part 2
Teraflex JK Jeep Wrangler CB Antenna Mount
Teraflex JK Jeep Wrangler CB Antenna Mount
RELATED FACTS
Share this Post

Related posts

Antennas for HDTV reception

Antennas for HDTV reception

NOVEMBER 18, 2017

This antenna ended up being integrated 2009. It is currently 2015. We still have it and it s really still carrying it out…

Read More
Medium Multi directional antenna Indoor

Medium Multi directional antenna Indoor

NOVEMBER 18, 2017

Optimize your HDTV reception with this low-profile, omnidirectional interior antenna that gets both UHF and VHF band signals…

Read More